Bored Pile Drilling Rig KLU20-600

Higher Efficiency and Lower Consumption High Reliability and Flexibility Multi-function

The bored pile drilling rig is introduced as below:

 Advantages

1.Crawling mechanism and walking mechanism can be ex-changed.

2.The column can be adjusted from two sides to ensure verticality of the drilling hole.

3.Drilling and piling at the same time. Improves the efficiency of drilling holes and shortens the time of the project..

4. No noise, no vibration, no pollution and good quality of drilling holes.

5. Accuracy and convenience in position by up and down the column.

6.Operation systems like electronic system, hydraulic system, monitor system are all gathered in the operation room for comfortable and convenient operation..

  Structure design

1. The column is foldable. The complete appliance can attached with towing device to be transported from different construction sites.

2. The power head system uses three-ring  reducer mechanism, with great weight bearing capacity, and reliable in use.

3. The side adjustment mechanism can work independently to adjust the verticality of the column.

4. Spiral vane of the drilling rod uses high quality carbon steel 16Mn, which is hard-wearing, good in strength. The bit inlays carbide blades to drill faster than normal.

5. The main windlass uses reducer with greater reduction ratio, which is simple in structure but good in the rope-arranging work.

KLU WALKING TYPE		KLU20-600
walking way		Electro-hydraulic crawler
max drilling depth		20m
max drilling diameter		600mm
max output torque		36KN.m
rod rotated speed		26r/min
allowed lifting force		240KN
power of power head		45KW*2
reductor of power head		ZZSH430
leader size		rectangle section
leader height		24m
leader oriented center distance		600*102
leader incline range		front inclination 5°back inclination 3°
length of crawler on the groud		3.2m
width of track plate		600mm
climbing ability of pile frame		< 4°
rotary	rotary way	rotary motor
	rotary angle	≤360°
	rotary speed	0-0.3r/min
main winch	single pulling force	4T
	motor power	15KW
	increasing speed	2.4/3.0/3.5
vice winch	single pulling force	1.5T
	motor power	7.5KW
	increasing speed	20m/min
overall dimension(L*W)		9m*4.5m
total weight(T)		52

Bored Pile Drilling Rig KLU20-600